BabyDan Premier Pressure Indicator Gate White

• Pressure Fitted      
• White Metal Gate
• Two Way Opening
• Double Locking Mechanism
• Self Testing Pressure Indicator
• Compatible with Extensions
• Standard Width: 73-80 cm
• Maximum Width with Extensions: 120 cm

Please note when using 3 or more extensions, customers are advised to use the wall cups which are included with the fittings.


Product Code: 101304

Pressure Fitted: 

Pressure Fitting Stair Gates are very popular amongst parents. These safety gates are very easy to install.  The spindles at the top and bottom of each side of the gate are twisted outwards until the fit is secured.  Pressure fitting gates offer the benefit of being portable, in that they can be easily moved between openings.  Pressure fitting gates do come with Wall Cups which can be fixed by adhesive pads or screws to the wall or banister, and offer further peace of mind.  For increased safety all manufacturers recommend the use of wall cups with their pressure fitting gates. Due to the potential trip hazard of the bottom bar which is required for the pressure fit, pressure fitting gates must not be fitted at the top of stairs.

Two Way Opening:

This stair gate can be opened both towards you and away from you.

Double Locking Mechanism:

For additional child safety, helping to prevent inquisitive toddlers opening the gate, this gate has the benefit of double locking mechanism. 

Testing Pressure Indicator:

The BabyDan Self Testing Pressure Indicator is a patented system which warns the user if there is insufficient pressure applied.  When the Indicator warns of insufficient pressure, the user can simply re-tighten the spindles.  This allows BabyDan Indicator gates to be fit without the use of wall cups. The indicators are built into the handle so is clear to see every time the gate is opened.

Compatible with Extensions:

Additional extensions can be added to this safety gate, which will enable it to fit a wider space than the Standard Width. 

Please see the Extension Guide.

Extension Guide:

Additional extensions can be added to this gate which will allow you to fit this gate in a wider space.

How to measure for your gate;

To ensure you buy the right gate and extension combination, you will need to take two measurements.

1.   Floor level - Measure the space to be filled at floor level.  This may be wall to wall, skirting board to skirting board, etc

2.   Top of Gate - Measure the space to be filled 75cm above floor level.

Both of the measurements taken (Floor Level and Top of Gate), must fit within the same width range given in the table below.

Click » here to write a review.

Pages :  1 

I bought direct from Safetots website as they have a stair gate finder tool, which allows you to enter the width of gate you need and it works out how many extentions you require. We needed a gate for our hallway as we live in a bungalow, the size was 101cm at the bottom and 104cm at the top, this was the only gate which would fit with one triple and one single extension.
I ordered the gate on saturday evening, and it arrived on tuesday. Excellent service and quality.

by: Rachel Essig | 2010-07-13 23:16:05