Safetots Infinity Extra Wide Safety Gate

• Great solution for unusually shaped areas
• Three panel configuration.  The side panels measure 990mm and the gate opening panel measures 975mm.
• The panels when interlocked sit on an 'angle disc'.  The disc allows each panel to be angled between 90 degrees and 130 degrees, as shown in image 4.
• Made from beechwood and silver powder coated steel
• Wall mounted brackets included to ensure maximum stability.  The gate should NOT be left freestanding
• Double locking mechanism
• A widget is placed at the bottom of the gate opening panel to determine which direction the gate opens (to you or away from you).  The widget can be adjusted as required
• The Infinify gate can also be used as a fireguard (the gate needs to be installed at a sufficient distance from the heat source)
• The Infinity further comes with anchor screws to increase stability should you wish to use it outdoors.  

Dimensions:

• Minimum possible width is 100cm - making three sides of a square shape (As shown by the BLUE LINE in image 4)
• Maximum possible width is 245cm if both outside panels are on one side of the gate panel (As shown by the GREEN LINE in image 4)
• Maximum possible width is 230cm if the outside panels are on opposite sides of the gate panel (As shown by the RED LINE in image )
• The height of the gate panels is 76cm

Image 4 shows the potential of the infitiy gate.  Each of the two outside panels can be set in either the top of bottom of the grey shaded areas either side of the gate opening panel.

Click » here to write a review.

Pages :  1 

Just fantastic as a pet gate - easy to put together.

by: Mrs V Little | 2012-03-07 12:59:17

Delivery within four days. Good looking and well constructed gate Very pleased all round!!

by: Pauline French | 2012-03-07 12:51:38