Safetots Wooden Multi Panel Fire Surround Range

As low as £126.70

In stock

Only %1 left

Brand: Safetots
Gate Material: Wood
Width Of Walkthrough: 55cm
Height When Installed: 76cm
Depth Of Frame: 2cm
Width Between Bars: 6cm

Next Working Day Delivery Available ( 6th/Dec/2023 ) for the next

Fire Guard Size

- +

SKU

BetaParentWMP

Find your perfect fire guard in just 30 seconds

Start Now

365-Day Return Policy

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Installation and FAQs

INSTALLATION

FAQs

How To Install The Safetots Wooden Multi Panel Wall Mounting Kit

Description

The Safetots Wooden Multi Panel Fire Surround has been designed to provide optimum quality, versatility and safety. The panels measure 76cm in height and restricts access to the fireplace for inquisitive toddler. The premium quality of the hardwood creates a modern finish which compliments any home interior. The fire surround gate opening panel has a one handed operation, can be opened in either direction and has a double locking mechanism. The fire surround is installed using the included wall mounting kit which must be screw fitted onto the wall, each panel is flexible and can be angled into different positions allowing you to make any configuration. Additional panels can be added to the configuration if required and are available in 80cm (gate opening panel and extension), 60cm, 40cm and 20cm extensions, to add to the width or depth of the configuration if required.

Please note it is recommended to leave a minimum of 60cm from the heat source to the fire surround. However, this is a recommendation ONLY.

Safetots offer 10 pre made Wooden Multi Panel Fire Surround configurations, each include the required wall mounting kit and comprise of the following panels.

49D x 120W cm (3 x 40cm extensions, 1 x 80cm gate opening panel, 1 x wall mounting kit)
49D x 160W cm (4 x 40cm extensions, 1 x 80cm gate opening panel, 1 x wall mounting kit)
49D x 200W cm (2 x 40cm extensions, 2 x 60cm extensions, 1 x 80cm gate opening panel, 1 x wall mounting kit)
69D x 120W cm (2 x 60cm extensions, 1 x 40cm extensions, 1 x 80cm gate opening panel, 1 x wall mounting kit)
69D x 160W cm (2 x 60cm extensions, 1 x 80cm extensions, 1 x 80cm gate opening panel, 1 x wall mounting kit)
69D x 200W cm (4 x 60cm extensions,1 x 80cm gate opening panel, 1 x wall mounting kit)
89D x 120W cm (2 x 80cm extensions, 1 x 40cm extensions,1 x 80cm gate opening panel,1 x wall mounting kit)
89D x 160W cm (3 x 80cm extensions, 1 x 80cm gate opening panel, 1 x wall mounting kit)
89D x 200W cm (2 x 80cm extensions, 1 x 40cm extensions,1 x 80cm gate opening panel,1 x wall mounting kit)

Additional extensions of 20cm, 40cm, 60cm or 80cm can be added to extend any pre made configuration if required. Alternatively please see our make your own fire surround listing.

Made from premium grade wood designed to compliment all home interiors
Each panel can be angled as required to provide extra flexibility when setting up the fire surround
The combination of panels in each configuration is described in the description.
Extra Wide Door Section for Easy Access to fireplace, with simple slide and lift opening mechanism
Easy to install with easy release fittings to ensure panels can be easily added and removed
Additional extensions are available in 20cm, 40cm, 60cm, and 80cm to fit wider widths if required
The wall mounting adds an additional 9cm to both side panels which has already been calculated into the measurements shown
Can be mounted against skirting boards and walls
A distance of 60cm is recommended to be kept between the barrier and the heat source
Measurements of fire surround are taken from external points of panels

Delivery

Next Dispatch in

Method	Delivery Date	Price
Next Working Day Courier	Thursday 07th Dec	£12.95
2-3 Day Courier	Friday 08th Dec - Monday 11th Dec	£6.95
Royal Mail * Only available for order value under £20 and order weight under 1KG	Monday 11th Dec - Wednesday 13th Dec	£2.95

Safetots Safety Advice

Our fire surrounds are fixed to a wall or similar surface that restricts access to heat appliances by enclosing them on all vertical sides. They are made from metal or wood, available in different colours and are constructed using vertical poles. As such, many families find these an aesthetically pleasing solution to enclosing a fire.

Important Information

Safetots’ fire surrounds come with a set of instructions to assist with installation. Please attach and position the surround according to these instructions.

POSITIONING YOUR FIRE SURROUND

There is no specific British or European Safety Standard for fire surrounds. The British Standard BS 8423:2010, for Fireguards (with a Top) for fires and heating appliances for domestic use, states that any part of the fireguard should be no closer than 300mm to any exposed burning fuel, heated elements or radiants. Safetots recommend that customers act with caution when positioning their fire surround to ensure that it is fitted far enough away from the heat source to prevent it becoming hot to the touch. It is the customer’s responsibility to ensure that the fire surround is positioned safely away from the heat source. Once installed and in use, we advise you test and check your fire surround before allowing a child to come into contact with it. Please also ensure the fire surround is installed at a safe distance to ensure any limbs are unable to reach through the bars and come into contact with any heat source.

Children’s skin may be more sensitive to temperature than an adult’s so check that the surround or objects close to the fire do not become too hot to the touch. It is worth bearing in mind that this will be dependent on the level of heat radiating from the heat appliance so routine checking is best practice.

Do not place any object or dry washing on the fire surround. Always place the fire surround directly on the floor and do not allow children to swing on any of the panels.

Safetots’ fire surrounds are wall mounted and as such, the surfaces to which the fixings are attached need to be structurally sound and in good condition. Screws are provided for fixing into wood. For fixing to plastered walls, plasterboard, concrete or brick surfaces, surface preparation and separately purchased wall plugs, appropriate for the mounting surface, will be required.

Safety Testing

When buying a product to help keep your child out of harm’s way, Safetots believe it is worth investing in one that has been tested to a professionally approved level of safety using rigorous testing methods.

For this reason and where applicable, our products are tested to a British Standards Institution (BSI) standard and/or equivalent international standard. Each standard that our products complies with has been drawn up by a group of experts in the field. Not only do they have extensive knowledge about their product and credibility in the child safety product industry, they are also fully aware of the potential hazards posed by poor quality items being used in the home where children are involved.

There is no specific British or European Safety Standard for fire surrounds.

When the gate panels and wall fittings are fitted as instructed for safety barriers, this product conforms to EN 1930:2011. As previously stated, further information on safety testing under this standard may be found on our Safety Barrier pages.

Protecting your family, pets and home from the risks of open fires, log burners, multi fuel burners, gas and electric fire appliances is a key consideration, particularly as the weather gets colder and we turn the heating up.

The choices of barriers available may seem rather confusing. There are many different labels applied to such products in the industry including nursery guard, fire screen, spark guards, surrounds and fireguards to name a few.

To keep it simple, Safetots only use the terms fire surround and fireguard.

Our Fireguards provide protection from all sides (vertical and horizontal) as they have an additional top mesh surface to prevent falls from above or items potentially being dropped close enough to the heat source to catch fire. All fireguards must be constructed with metal mesh and do not covert to other domestic uses. These are tested to the safety standard BS 8423:2010, the recognised standard for fireguards for domestic use.

It is worth noting that neither a fireguard nor a fire surround is intended to reduce the risk of fires caused by flying particles from the heat source. Always store the matches or other means of lighting this type of fire out of children’s reach and fit and routinely test a smoke and carbon monoxide alarm. It is never advisable to leave a small child unattended.

Compare Products

Product

Brand

Gate Material

Width Of Walkthrough

Height When Installed

Depth Of Frame

Width Between Bars